noax Industrial PCs stay cool - Thanks to efficient 3-Stage Thermal Management
Tuesday, January 23, 2024
It's not just cell phones that break down when it gets too hot - overheating is one of the most common causes of failure in all electronic devices and technical components. A temperature increase of just 10 °C reduces the service life of devices by around 50 percent. In the industrial environment, protection against overheating is especially challenging. Due to the extreme conditions with vibration, shock, humidity, water, heat, bacteria, oil, dirt or dust, special hardware is required: completely enclosed industrial PCs without external fans. With their efficient 3-stage thermal management, noax industrial PCs offer a reliable solution for continuous use in harsh, industrial environments.
EBERSBERG, Germany, Jan. 15, 2024 /PRNewswire-PRWeb/ -- It's not just cell phones that break down when it gets too hot - overheating is one of the most common causes of failure in all electronic devices and technical components. A temperature increase of just 10 °C reduces the service life of devices by around 50 percent. In the industrial environment, protection against overheating is especially challenging. Due to the extreme conditions with vibration, shock, humidity, water, heat, bacteria, oil, dirt or dust, special hardware is required: completely enclosed industrial PCs without external fans. With their efficient 3-stage thermal management, noax industrial PCs offer a reliable solution for continuous use in harsh, industrial environments.
Top Performance: Only with Optimal Temperature Management
At Bosch Tiernahrung, for example, the tough noax IPCs are "... in brutal use - the forklifts drive around in the halls and outside: at - 4 to + 104 °F and high humidity." In this environment, completely enclosed industrial PCs with efficient thermal management are required. This is because the demands on industrial hardware are increasing even the low temperature range reduces the service life of components and also cause a drastic reduction in the performance of devices. So anyone who buys a completely enclosed "high-performance device" on paper without paying attention to active thermal management will quickly experience disappointment. "We can only afford devices that simply run all the time, even under extreme conditions," this is why Aluminium Rheinfelden chose noax.
Superior proprietary development to prevent overheating
The control and regulation of heat development in technical devices depends on many factors. noax relies on an elaborate in-house development with high-quality industrial components which prevents overheating with its smart noax heat management in 3 stages:
3 stages for long service life and high performance
noax active thermal management
1. avoid heat
The approach: Where no heat is generated, none needs to be controlled. However, since every electronic component and every printed circuit board generates heat, noax uses only industry-standard components in the in-house development of its mainboards, which are also optimally matched to each other. These are not only characterized by longer availability and higher quality but also have significantly lower energy consumption. The additional advantage: less heat is generated.
2. distribute heat
"I really liked the fact that the noax IPCs have no external fans" (ALSTO Präzisionsspannwerkzeuge). With the completely enclosed all-in-one PCs, protected all around from dust and dirt, it is extremely important to control the heat flows flow inside the device. noax uses a special process to avoid heat hotspots. The self-developed software tool nSmart supports reliable performance even at extreme temperatures.
3. dissipate heat
To reduce the overall temperature inside, noax also relies on heat dissipation via thermally optimized housing developed in-house. By using materials that are as conductive as possible in combination with heat flow matched to them, the heat is optimally dissipated via the back cover of noax industrial PCs. To reduce the overall temperature inside, noax also relies on heat dissipation via thermally optimized housing developed in-house. By using materials that are as conductive as possible in combination with heat flows matched to them, the heat is optimally dissipated via the back cover of noax industrial PCs.
With the active 3-stage thermal management, the completely self-developed noax industrial computers remain cool even in heat and extreme ambient conditions - this ensures a long service life with full performance. An investment that pays off, as noax customer Mondi Gronau confirms: "We (paid) special attention to durability and running safety. Here, noax was and is far ahead of its competitors. We have never had a halt in production."
With the active 3-stage thermal management, the completely self-developed noax industrial computers remain cool even in heat and extreme ambient conditions - this ensures a long service life with full performance.
Media Contact
Bobbie Sexton, noax Technologies Corp., 001 704 992 1606, info-na@noax.com, https://industrial-panel-computer.com/
View original content:https://www.prweb.com/releases/noax-industrial-pcs-stay-cool---thanks-to-efficient-3-stage-thermal-management-302033615.html
SOURCE noax Technologies Corp.
|
|
|
|
|
 |
Energy Toolbase Launches Energy Storage Partnership with Sungrow to Support PowerStack 255CS and PowerTitan 2.0 | Jan 22, 2026
|
|
RS now offers Phoenix Contact's pioneering new NearFi technology | Jan 22, 2026
|
|
Einride and IonQ Partnership Uses Quantum Computing to Optimize the Logistics of Electric and Autonomous Freight | Jan 22, 2026
|
|
SCAILIUM Debuts "AI Production Layer" to Overcome GPU Starvation and Slash AI Energy Waste | Jan 22, 2026
|
|
MetaOptics to Showcase Five Breakthrough Metalens-Powered Products at CES 2026 | Jan 22, 2026
|
|
Quantum Art Raises $100 Million in Series A Round to Drive Scalable, Multi-Core Quantum Computing | Jan 22, 2026
|
|
No Assembly Required: Barrett Distribution Centers Powers Maxwood Furniture's West Coast DTC Expansion | Jan 22, 2026
|
|
Hesai Recognized as the Only Lidar Company on Morgan Stanley's "Humanoid Tech 25" of Global Robotics Leaders | Jan 22, 2026
|
|
Fresco Raises EUR15m Series C to Power the Future of AI-Driven Cooking and the Connected Kitchen Ecosystem | Jan 22, 2026
|
|
Cellid and Jig.jp Jointly Develop AR Glasses | Jan 22, 2026
|
|
|
